Simple & Miniature Sandpaper Block/Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses M3 hardware. Small in size for quickly sanding the edge of a product prior to install in carpentry applications.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 255
- Wydruki
- 1
- Wyświetlenia
- 953
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a tiny sanding block to keep in my tool belt for carpentry work. This is not designed for lots of sanding work, simply to quickly tidy up a cut edge on a cladding sheet or similar application prior to installation. For instance, cutting fibre cement cladding sheets leaves an edge that requires one or two passes with sandpaper.
Simply cut a strip of sandpaper to roughly 150mm long and 25-30mm thick. Easily achieved with a standard 30cm ruler as a straight edge. The dimensions were designed around a roll of sandpaper from my local hardware store that measures 115mm wide. This allows me to get 4 refills from a single 150mm piece.
Parts:
1 x M3 * 20-25mm screw
2 x M3 nut