Simple & Miniature Sandpaper Block/Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses M3 hardware. Small in size for quickly sanding the edge of a product prior to install in carpentry applications.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 255
- Makes
- 1
- Views
- 953
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a tiny sanding block to keep in my tool belt for carpentry work. This is not designed for lots of sanding work, simply to quickly tidy up a cut edge on a cladding sheet or similar application prior to installation. For instance, cutting fibre cement cladding sheets leaves an edge that requires one or two passes with sandpaper.
Simply cut a strip of sandpaper to roughly 150mm long and 25-30mm thick. Easily achieved with a standard 30cm ruler as a straight edge. The dimensions were designed around a roll of sandpaper from my local hardware store that measures 115mm wide. This allows me to get 4 refills from a single 150mm piece.
Parts:
1 x M3 * 20-25mm screw
2 x M3 nut