1 / 1
Nozzle Change Tool Ideas(ノズル交換道具2種) — zdjęcie 1

Nozzle Change Tool Ideas(ノズル交換道具2種)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a collection of ideas for quickly and easily changing the nozzle on an E3D type hot end.

Ocena
0 / 5
Polubienia
7
Pobrania
12
Wydruki
0
Wyświetlenia
676
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Public Domain

Attachment(3Ddata)

This is an attachment to combine a ratchet screwdriver with a 7mm hexa head.

・PETG(PC blend is better)

・Printed with a 0.2mm layer(0.1mm is better)

It will be printed sideways and fitted with a 10mm steel grub screw set to minimize the risk of breakage.

This attachment connects the two tools together.

山下工業研究所(Ko-ken) ソケット 6角 Z-EAL 2400MZ-7 https://amzn.to/3E2nTyT

兼古製作所(Anex) ミニスタービードライバー ラチェット式 No.316 https://amzn.to/3E0hmo5

 

Heatblock holding tool

This is a tool to fix the heat block. 

I used a combination of fittings obtained from a Japanese hardware store like Home Depot.

It is very simple but easier to work with than using a monkey wrench.

 

【日本語(Japanese)】

E3Dタイプのホットエンドのノズルを簡単に素早く交換するためのアイデア集です。

アイデアの1つ目はラチェットドライバーに7mmのヘッドを最も短く組み合わせるためのアタッチメントになります。

PETGで0.2mmレイヤーでプリントします(PC blend、0.1mmレイヤーのほうが確実です)。

横に倒してプリントし、鉄ホーローセット(10mm)を装着することで、破損のリスクが小さくなります。

アイデアの2つ目は、ノズル交換時にヒートブロックを固定する治具です。

東急ハンズ(ホームセンター)で入手した金具を組み合わせました。

とてもシンプルですが、モンキーレンチを使うよりも作業しやすいです。

Tagi