1 / 3
Raspberry Pi Camera mounting bracket for Ender 3 S1 / S1 Pro — zdjęcie 1
1 / 3

Raspberry Pi Camera mounting bracket for Ender 3 S1 / S1 Pro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bracket to mount a Raspberry Pi Camera to the display mounting location on an Ender 3 S1 / S1 Pro.

Ocena
0 / 5
Polubienia
7
Pobrania
35
Wydruki
0
Wyświetlenia
393
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This bracket is to mount a Raspberry Pi camera mount on the original location of the display on an Ender 3 S1 or S1 Pro. The display mount has to be removed (I replaced it by a more compact display mount) to be able to use this.

It is designed to fit this bracket for the camera (using a M3x20 screw):
https://cults3d.com/en/3d-model/various/prusa-mini-raspberry-pi-3b-camera-mount-by-clip-fastening

I printed it in Overture PETG on an Ender 3 S1 Pro using Cura as slicer.
Layer height was set to 0.2 mm and infill to 20%.

Tagi