Case for ESP32 Cam with USB Programmer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case designed for the ESP32 Cam when connected to the ESP32 Cam USB Programmer board.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 624
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This enclosure is purpose-built to accommodate both the ESP32-CAM and its USB programmer board, enabling easy setup without any soldering or extra power connections. It’s now fully compatible with standard Micro USB cables for added convenience.
You can find both the ESP32-CAM and the USB programmer board locally in South Africa at the following links:
The case is designed for a clean print with no supports required. For this particular print, I used SA Filament PLA in blue. However, if the case will be exposed to direct sunlight or harsher environments, PETG or ABS filament is recommended for better durability. The lid features a simple snap-fit design for secure closure.