Vespa Cosa Front Brake Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vespa Cosa Front Brake Cover – Discontinued Part Replacement
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Vespa Cosa Front Brake Cover – Discontinued Part Replacement
An accurate reproduction of the Piaggio Vespa Cosa front wheel brake / hydraulic line cover — the trim cover that shrouds the front brake and hydraulic line. This part is long discontinued and hard to find, so printing a replacement is often the only practical way to restore the original look of your Cosa.
Carefully modelled to match the factory part.
✅ Features
Accurate model of the Vespa Cosa front brake / hydraulic line cover
Replaces a discontinued, hard-to-source part
Restores the factory appearance
🖨 Recommended Print Settings
Setting | Value |
|---|---|
Material | PETG (ASA/ABS recommended for UV/heat durability outdoors) |
Layer Height | 0.2 mm |
Nozzle | 0.4 mm |
Supports | Required |
Print time | ~37 min (reference, Prusa MK4) |
Weight | ~13 g (reference) |
💡 Orientation options: print face down with supports only in the recess, or print face up with supports behind. ASA or ABS is worth considering over PETG for better UV and heat resistance on an exposed part.
🔧 Installation
Print in your chosen orientation and remove supports carefully.
Clean up the recess and mating faces.
Fit to the front brake / hydraulic line area using the original mounting points.
🛵 Compatibility
Piaggio Vespa Cosa — front wheel brake / hydraulic line cover
Restoring a Cosa? Post a make — these old parts deserve to stay on the road.