Pressure Washer Nozzle Case print in place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made an 8 slot pressure washer nozzle case with drain holes.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Made an 8 slot pressure washer nozzle case with drain holes. This will provide enough space for the standard 5 nozzles (e.g., 0º, 15º, 25º, 40º, 65º(aka soap nozzle) ) As well 3 spaces for 2nd story nozzles or any other specialty nozzles.
This is a print-in-place item, and the hinge is built-in. It has drain holes to help allow any water to drain off.
Slicer note:
If using prusa slicer (or similar) when it ask the question
"This file contains several objects positioned at multiple heights.
Instead of considering them as multiple objects, should
the file be loaded as a single object having multiple parts?"
Click on yes. So that it prints the hinge properly.