1 / 4
Multiplex Funray FPV Camera Canopy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FPV canopy for the Multiplex FunRay RC plane. Designed for the Walksnail Avatar FPV system but should fit any other standard FPV camera as well. The two pins for the original latching mechanism are printed separately and should be glued in place to ensure a tight fit.
If you want to modify my design, it is available on onshapehttps://cad.onshape.com/documents/68d8f391968c678e175026e9/w/7f1529dac1984b64b92559e3/e/439ad87b4a7de49d3fece878
I tried to find the best compromise between an aerodynamic design and minimizing the amount of the plane visible in frame.
