Lightweight adapter V2 - AAA to AA - 11g down
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for swap heavy AA battery to lighter AAA. It was created to use for gaming mice.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — NoDerivatives
This adapter will help to reduce your mouse weight. I recommend useing lithium battery with this mod to lower weight as much as possible. Adapter holds on battery pretty well ;) There is v2 model now.
weight: (material PETG)
AA alkaline normal = 24g
AA lithium normal = 15g
AAA alkaline + mod = 13g
AAA lithium + mod = 9g
Assembly - use 1,4mm cu wire for + side. Wire should overlap 0.2mm at inner and around 1mm for outer to get good contact.
Print:
SEAM like on the picture
No supports
Print as on picture
0.2 layer height, 2 walls - solid
Material:
!!! Use a bit flexible material !!!
PETG recommended
PLA not recomended and will break (too fragile - not flexible)