Adventure Force X-Series Magazine Extender - Extra Extra Edge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little mod to boost your 12-round X-mags to 20 rounds.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A little mod to boost your 12-round X-mags to 20 rounds. NOTE: This does require a longer spring than the one included - I ended up getting mine from Frontline Foam but any decent-sized magazine spring should work (you should even be able to use a spring from a genuine Talon, if you really wanted to for some reason). As with the original Tactical Edge, it supports the original baseplates supplied with the magazine, or the Thangle baseplates.
Print Settings
Resolution:
0.1
Infill:
0%
Filament:
eSun PLA Orange
Notes:
I would highly recommend printing at a small layer height, as it allows for smoother operation.