HSW Holder for electric Screwdriver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for an electric screwdriver-and-bits-box (or any Box really) that's about 20mm x 88mm x125mm
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 2
- Wyświetlenia
- 236
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I designed this holder for my electric screwdriver box/ set, it does originally have a whole case that goes over it but I found it to be more practical to just have it “open” and in arms reach, so that I can easily pull it out of its place on my Honeycomb Storage Wall that resides on the side of my printers enclosure. Theoretically you should be able to use it for different tools or purposes and put in anything else that fits the dimensions :)
I printed the model in silver PLA on my Prusa MK4 with a nozzle diameter of 0,6mm and 0,32mm layer-hight. The box is printed upright and will need supports for the the mounting nubs, but those should be easy to remove.
It isn't a detailed part or under a lot of stress and for now it has been holdiNg up really well under moderate use for about 4 months.