Makita Bit Holder 6x
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 6 bits on Makita drill or driver
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 177
- Wydruki
- 3
- Wyświetlenia
- 888
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Makita bit holder inspired by https://www.printables.com/model/174105-makita-bit-holder
Hold 6x ¼" or 6mm hex bits on the side of your drill, easy to remove with space for a finger behind them.
Prints by default to fit on the LEFT side of your drill, mirror the model file in your slicer to attach to the right side of the drill.
Prints with supports in the lying down direction. You can print the top part that covers up all of the bits as a bridge without supports, I would recommend doing so as it saves time removing supports later.
Print out of normal unfilled PLA, or print in ASA for more durability. The snaps are designed for unfilled plastics, if you use a filled (carbon, wood, etc) the bits may be too hard to remove.