DIY Silicone Tube Nozzle Wiper Prusa XL (Mounting Hardware Free)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make a nozzle wiper with inexpensive silicone tubing and no mounting hardware for your Prusa XL
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 167
- Wydruki
- 6
- Wyświetlenia
- 2149
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I happened to stumble onto Timeless Doctor's solution for wiping prusa xl nozzles. It is inspired by successes from other printers, and doesn't require any ‘exotic’ parts.
I decided to model a version from scratch that requires zero mounting hardware, instead solely relying on a 3030 twist lock. I also created two versions, a single and double brush version.
I would recommend PTEG for this model. I personally was printing PC parts and added this to the batch. I needed to use pliers to do the first twist on and off a 3030 extrusion (used the side of the printer) after that I could hand twist the part with no issues.
Updates:
(07/05/24) Added a variant that accommodates an m3/m4 bolt on the right side, pair with a 3030 twist nut. (3d printed or metal)
Required Parts:
7mm outer diameter (od) 3mm inner diameter (id) silicone tubing (ref link) https://amzn.to/4bwcMyM
Tubing cutting jig:
https://www.printables.com/model/684146-cutter-for-ultimate-nozzle-wiper
Nozzle position indicator:
https://www.printables.com/model/462473/files (my recommendation is to position a tad to the right of the center of the arrow)