1 / 4
DIY Silicone Tube Nozzle Wiper Prusa XL (Mounting Hardware Free) — image 1
1 / 4

DIY Silicone Tube Nozzle Wiper Prusa XL (Mounting Hardware Free)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Make a nozzle wiper with inexpensive silicone tubing and no mounting hardware for your Prusa XL

Rating
5 / 5
Likes
50
Downloads
167
Makes
6
Views
2,149
Reviews
7

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I happened to stumble onto Timeless Doctor's solution for wiping prusa xl nozzles.  It is inspired by successes from other printers, and doesn't require any ‘exotic’ parts.

I decided to model a version from scratch that requires zero mounting hardware, instead solely relying on a 3030 twist lock.  I also created two versions, a single and double brush version.

I would recommend PTEG for this model. I personally was printing PC parts and added this to the batch.  I needed to use pliers to do the first twist on and off a 3030 extrusion (used the side of the printer) after that I could hand twist the part with no issues. 

 

Updates:

(07/05/24) Added a variant that accommodates an m3/m4 bolt on the right side, pair with a 3030 twist nut. (3d printed or metal)

 

Required Parts:

7mm outer diameter (od) 3mm inner diameter (id) silicone tubing (ref link) https://amzn.to/4bwcMyM

Tubing cutting jig:
https://www.printables.com/model/684146-cutter-for-ultimate-nozzle-wiper

Nozzle position indicator:
https://www.printables.com/model/462473/files (my recommendation is to position a tad to the right of the center of the arrow)

 

Tags