SV06PLUS ADAPTER FOR THE SPRITE PRO EXTRUDER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter is for adding a Creality Sprite pro extruder to the sv06 plus. must have ender3v2 L SHAPED metal bracket.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
USE AT YOUR OWN RISK, STILL A WORK IN PROGRESS
This is the first adapter to allow a sprite pro extruder to be installed on a Sovol sv06 plus. It may work for other such as sv06 reg. This adapter allows a sprite extruder to be added to the x axis plate while still using the metal bracket that came with the sprite pro extruders for the ender 3v2. it uses the l bracket that has the pom wheels just remove those and add 2 3mm screws through the back to secure. I highly recommend using abs or asa as those filaments are way stronger and can handle more heat but this is still a rigid setup using petg with 5walls and 25% infill. Still a work in progress as of know it clears everything so far still wiring up to test and adjusting the bltouch. I do believe i am going to lose some bed space due to the nozzle being farther forward. I am sure i will revise this a few times until i get everything right but seems really good so far.
update: I have it wired up and working has already printed a calibration cube and i am still going through the pressure advance tuning hope to have it adjusted soon, I did have to change some things around as far as the bed goes, mainly adding the new probe locations and had to adjust the bed mesh min and max, so far so good though. this extruder works way better.
Please leave a like, post a comment or a make. I would greatly appreciate it and thanks you for your time.