Qualcast grass trimmer to parkside battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery dock for parkside battery on qualcast grass trimmer
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
So you bought a qualcast trimmer without a battery or for whatever reason would like to use Parkside (Lidl) batteries with it? Here you are a battery dock for parkside X20V.
This fits 20V brushed version of the Qualcast trimmer, not the 36V brushless one!
Instructions:
-print the dock on the back side with supports. I printed in PETG using 3 walls and 20% infill.
-prepare battery pins/blades - I used a piece of 0.5mm copper sheet and cut out a 4-5mm strip. I bent and folded the strip to make it stronger. You can cut it with scissors and shape with pliers.
-solder wires to the end of the pins, insert pins from the back side and route the wires through the channel in the model to the upper side,
-secure the back side of the pins with some hot glue. Before applying the hot glue you can use a bit of a super glue that will penetrate between the pin and plastic body to make it more robust.
-once done and checked you can press the “plug” into the back side to cover the wires and pins.
-installation in the trimmer should be quite straight-forward. You just need to disassemble the handle and solder some wires.