Qualcast grass trimmer to parkside battery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery dock for parkside battery on qualcast grass trimmer
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
So you bought a qualcast trimmer without a battery or for whatever reason would like to use Parkside (Lidl) batteries with it? Here you are a battery dock for parkside X20V.
This fits 20V brushed version of the Qualcast trimmer, not the 36V brushless one!
Instructions:
-print the dock on the back side with supports. I printed in PETG using 3 walls and 20% infill.
-prepare battery pins/blades - I used a piece of 0.5mm copper sheet and cut out a 4-5mm strip. I bent and folded the strip to make it stronger. You can cut it with scissors and shape with pliers.
-solder wires to the end of the pins, insert pins from the back side and route the wires through the channel in the model to the upper side,
-secure the back side of the pins with some hot glue. Before applying the hot glue you can use a bit of a super glue that will penetrate between the pin and plastic body to make it more robust.
-once done and checked you can press the “plug” into the back side to cover the wires and pins.
-installation in the trimmer should be quite straight-forward. You just need to disassemble the handle and solder some wires.