Pond aquarium filter filtration medium helix moving bed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pond aquarium filter medium high surface. Good way to make use of filament leftovers rests models. 5 different sizes
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 347
- Wydruki
- 2
- Wyświetlenia
- 1261
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This media is a form of biological media used in the filtration process for pond / aquarium water. Its usefull as a moving bio bed and it will serve as housing for good bacteria.
The material you will use will determine if it will be a floating or a sinking media.
Density
PP = 0.9kg/liter (floats)
PETG = 1.27kg/liter (sink)
PLA = 1.24kg/liter (sinks)
Personal preference is size Medium Lite or Medium_v002 (best looking vs highest mm2 per gram of filament)
I really tried to optimise the surface area by making tapered extrusions, also small gaps between the layers will be beneficial to the surface area (but that its unmeasurable)
There are 5 sizes in this model:
4x for 0.4 mm nozzle:
Small = Ø10 mm
- 0.75 grams per printed model
- 1282 mm2 surface area
Medium_v002 = Ø15 mm
- 1.17 grams per printed model
- 2928 mm2 surface area
Medium - Lite = Ø15 mm
- 0.75 grams per printed model
- 2328 mm2 surface area
Large = Ø20 mm
- 1.57 grams per printed model
- 4144m2 surface area
(sizes are outer diameter, the height for all 3 models is 10 mm).
Small_0.2 nozzle = Ø10 mm
- Height 10.2mm
- 0.47 grams per printed model
- 2022 mm2 surface area
For reference on surface area:
Similar media like K1 has 950m2 per M3. That's around 0.95 meter per liter.
Printed media (medium_v002) is around 1.66m2 per liter.
Best to print in PP or PETG since PLA is biodegradable and will have to be replaced over time