Holykeebs Trackpoint Mouse Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a shield for the trackpoint module from Holykeebs to add a standard dedicated mouse button.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adds a standard mouse button switch to the trackpoint shield from Holykeebs. It is still an early prototype, and the right hand corner doesn't click as well as the left hand corner, but it works.
I used a thick (1.25mm) paperclip to add extra hold to the switch.
You will need to update your code to add a column and row for the switch.
For mounting you need a M2x3 for the button part and a M2x6 for the button top.
It' designed to be printed without supports and have the screw holes opened up after printing. I also had to cut a chunk out of the corner to compensate for some solder (see last photo).
I printed on a MK3S with 0.4mm nozzle in PETG.