24mm Big Thread Flat Head - T-Bolt with screw hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended Multiboard bolt with a hole to be screwed directly onto the wall. Extended for use with a bracket linked below.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gone down the deep end on Multiboard? Me too!
Check out my collection of Multiboard Models here!
Comments
The original bolt was extended by 4.5mm and a screwhole is provided through the bolt. The goal is to be able to screw this into the multiboard until it rests against the wall, and then to optionally screw it into the wall.
It also allows installation/strengthening the tile attachment without removing the tile from the wall.
This was originally designed to bolt this filament bracket to the wall. The length perfectly matches 8mm wall distance + 6.4mm of tile thickness + 10mm of part thickness.