Brace to help mount solar panels against a fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brace to help mount tilted solar panels against a fence
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a two part print which is joined, using a ¼" diameter 2½" long carriage bolt, to one end of a 2x2 wood plank.
It, together with the 2x2, braces the bottom of a solar panel allowing it to be optimally tilted towards the sun.
Included are the source Fusion 360 .f3d, .stl, and .3mf files for this print. The source is included as the print was designed to fit a Renogy 100 Watt solar panel but your solar panel may have different frame dimensions and you may want to make changes.
A ¼" hole is drilled very close to the top of the 2x2, which allows the 2x2 to rotate up to 90 degrees within the brace.
The 2x2 and print are further secured to the solar panel with a bungie cord along the top, and at the bottom with a plater block.
The top of solar panel is attached to fence with hinges; the hinges being rivetted to back of the solar panel's frame.
See included photos for more information.