1 / 5
Brace to help mount solar panels against a fence — image 1
1 / 5

Brace to help mount solar panels against a fence

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Brace to help mount tilted solar panels against a fence

Rating
0 / 5
Likes
3
Downloads
16
Makes
0
Views
318
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

This is a two part print which is joined, using a ¼" diameter  2½" long carriage bolt, to one end of a 2x2 wood plank.  

It, together with the 2x2, braces the bottom of a solar panel allowing it to be optimally tilted towards the sun.

Included are the source Fusion 360 .f3d, .stl, and .3mf files for this print.  The source is included as the print was designed to fit a Renogy 100 Watt solar panel but your solar panel may have  different frame dimensions and you may want to make changes.

A ¼" hole is drilled very close to the top of the 2x2, which allows the 2x2 to rotate up to 90 degrees within the brace.

The 2x2 and print are further secured to the solar panel with a bungie cord along the top, and at the bottom with a plater block.

The top of solar panel is attached to fence with hinges; the hinges being rivetted to back of the solar panel's frame.

See included photos for more information.

Tags