1 / 1
TPU Dampener Sleeve for Ultimaker 2 Feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable TPU Sleeve for the Ultimaker Flat Feet by Mape.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Instead of using Cushoning or similar, these TPU caps can be pulled over the Ultimaker feet.
You can find the matching printer feet from Mape here.
Print Settings
Printer:
Ultimaker 2+
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
20%, 3D Cubic
Top/Bottom Layers:
4
Walls:
3
Notes:
Print Top/Bottom very slow (20mm/s or less).
This is my first attempt with TPU, please let me know if you have any improvements, especially regarding the right settings.