THE FROG 3INCH-O3 DRONE FRAME FPV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the 3rd version of my 3inch design. It has amazing vibration performances and light like a Feather !
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 227
- Wydruki
- 0
- Wyświetlenia
- 1756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I designed it to tick all my boxes ;-)
[x] Lightweight
[x] Durable
[x] Vibration-free (or as close as possible)
[x] GPS compatible
[x] Battery bottom mounted
The proper tuning is ongoing and will probably be posted later on rotorbuilds.com, as the tuning depends on the motor you are using.
Vibration-wise, it is amazing, as you can see on the blackbox for a 1-minute freestyle flight. I know it's easier on a 3-inch frame, but there are no frame resonances and only one motor harmonic!
In the picture of the drone on the scale, it has a BetaFPV 4s 850mAh battery, and I get around 10 minutes of flight time. (sub250g)
This build also require some hardware : 2x M2x25 textured standoff and 1x M3x25 textured standoff