Working & Fully Printable Mini Bagpipe Practice Chanter (11in)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully 3d printed working bagpipe chanter in key G. You will need tpu for 2 small parts, the rest can be printed in pla
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 369
- Wydruki
- 1
- Wyświetlenia
- 2251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Donald Linsay designed a mini bagpipe chanter in high G, and I wanted to print it as a practice chanter so I took the top file from Kadaku's practice chanter and resized it to fit, and I also took the printable reed parts to make my design fully working and printable.
In the video I posted, I am playing my first prototype so it might not sound the best, I will reprint the reed and post a new video once it sounds better.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Resolution:
Chanter: 0.2mm / Reed 0.3mm
Infill:
15%
Notes:
You might need support when printing the reed_tube
Materials:
All parts PLA EXCEPT FOR:
reed_seal
reed_sleeve
(In the pictures I posted these are the black parts)
(IMPORTANT: these 2 need to be in TPU)
Perimeters:
2 perimeters
SIZES (IMPORTANT):
print the reed_sleeve at 107 scale
print the reed_seal at 115 scale
the rest are already scaled correctly
Post-Printing
Might need to wrap a layer of duct tape around the reed seal and around the top of the body of the chanter to get an airtight seal.
Might have to sand the tops of the reed lips as well to make the chanter easier to play.
After putting together the reed, gently bend the reed as shown in the picture and crease it to increase the size of the opening.
How I Designed This
Audio only- testing the bagpipe practice chanter:
Category: Music