Wallmount Ball Plunger Keychain Hanger (mostly parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang up your keys with ball plunger retention tags. Sanrio IP is NOT included in files.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hang up your keys with a satisfying clack using some Amazon purchasable ball plungers. No supports needed but some cleanup with a reamer or drill bit can make installation of the ball plungers easier. A vice or pliers will be necessary to fully seat them.
Additional parts needed (can be substituted if changing the parameters in CAD):
- ball plungers - Amazon Ball Plungers 5mm diameter, 6mm depth
- key chain rings - Amazon Key Rings
- mounting screws or command strips or adhesive of choice - Amazon Command Adhesive Strips Medium
If you'd like to make other tag designs without having to mess with the CAD files, you can design a solid tag and then use your slicer of choice to subtract “tag_negative.stl” from your design. You can also generate your own tag_negative from the CAD files if changing parts/parameters. If texture detail on the front face of the tag is required, printing face up without supports is generally fine since the bridging is fairly short and there is enough clearance for slightly droopy bridging.
MMU/AMS is convenient but generally not required here. Sequential printing with a few manual filament changes using M600/Pause commands works fine but may require some g-code editing.
Parameters in the f3d file have relatively self explanatory names; some less obvious
- wire_gauge - diameter of key chain open jump ring wire
- loop_diameter - diameter of key chain jump ring