Honor GS PRO Smartwatch Charging Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stable stand for all the Honor and Huawei sportwatches with round charging base.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple stable stand for Honor GS PRO sportwatch round charging base (and for all the other Honor and Huawei smartwatches with the same charging dock).
I designed it split in two pieces for better printing. The "main" file contains the main structure with the front half of the base. The "base" file contains the remaining half of the base. The two halves are designed so that they should just snap together without any post-printing work. The round base should fit without too much pressure between the 3 pins on the upper part. No support required.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament: Sunlu PETG
Grey
Notes:
No need for supports if you place the 2 parts in the most convenient way, just tune carefully your bridging parameters since there could be a critical overhang on the snap-fit hole in the base of the main part.
I printed it with a 0.8 mm nozzle and exploited PrusaSlicer automatic variable layer height in the range 0.2 - 0.5.Category: Gadgets