DJI Action 3 - Ruggage Storage Box

This is a remix of the Rugged Box from Whity

The box is designd to fit the DJI Action 3 and some commonly used accessories:

• The DJI Battery charging case
• 2x DJI mounting clip adapters
• 2x GoPro mounting clips (1x short and 1x long)
• 3x Mounting screws
• 3x Full size SD-cards
• Bin for other accessories

To assemble the box you need 6 M3x30mm screws.

If you don't want the logo on the lid, use the “DJI Action Box Lid - Blank.3mf” file. I provided the Fusion files I used. The main box file is basically Whity's file with my dimensions and the DJI logo added.

You can print the lid with multiple colors without an MMU or AMS. I used the settings listed below, or if you have the Prusa MK4 you can use the “DJI Action Box Lid - DJI MM.3mf” file and have all the settings applied.

The settings are based on the forum post by MinorHavoc (link), but I disabled the wipe tower. It still worked just fine for me.

1. In "Printer Settings"-->"General":
   • Set "Extruders" to desired number of colors
   • Enable "Single Extruder Multi Material"
2. In "Printer Settings"-->"Single extruder MM setup":
   • Set "Cooling tube position" to 10.
   • Set "Filament parking position" to 0.
   • Set "Extra loading distance" to 0.
   • These settings eliminate the filament getting retracted into heatsink section and possibly jamming there as well as eliminating the big blob created in the wipe tower after changing filaments.  I think the original values are appropriate for a physical MMU(2) where the filament is needs to be moved between the Bowden tube and the extruder tip but does the wrong thing for manual color changes.
3. In "Print Settings"-->"Multiple Extruders"-->"Wipe tower"
   • Disable “Wipe tower” (worked for me, try for yourself)
   • If you are using a Wipe tower: Disable "Prime all printing extruders".  Since we're manually changing filaments, there's no need to do this.
4. In the "Printer Settings"-->"Custom G-code"-->"Tool change G-code" section, put the following:
   • {if layer_num >= 0}M600 ; change to filament for extruder {next_extruder + 1}{endif}