1 / 2
Ferrari 360 and 430 Wind Stop Gasket - Center
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gasket is for the center wind stop (deflector) on a 360 and 430 Spider.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The wind stop gaskets on some Ferrari 360 and 430 Spiders are subject to deterioration and cracking. The replacements are expensive (about $1k for all three) and only available as OEM. The current aftermarket wind stops are horrible and not worth mounting on a fine car like the Ferrari.
This model should be printed with a soft filament around Shore 90A. They have to be pretty hard to be inserted into the frame but need to be flexible to fit around the bends.
The rollbar gasket is included in my model list.