Liczymy pasujące modele…
Simple adapter ring to fit CR2032 batteries inside of CR2430 battery devices. Simply push the battery inside the ring (snug fit) and place it inside whatever device you want to use it in. Both batteries are 3V so there should be no…
PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…
EDIT: May 2025 These labels have worked pretty well for me but I'm kinda hamfisted and I've managed to break a couple of them so I decided to make a stronger, more rigid version. There's not much left of the original design at this point.…
This model is compatible with the lego system.
This model is compatible with the lego system.
Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Holder for Dremel 4250 to be fitted on Honeycomb wall. Probably will fit another models like 4000-ish or 3000 but that's not for 100% sure. I Made a separate rail for cable as well. made from 2 parts. Not sure why, but just liked the…
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2…
This model is compatible with the lego system.
Just replacement of broken power button.
i need it some caddies replacements for a couple of dell latitude E6420 and E6430ATG, and i do not wanna wait 3 weeks for parts from main land, so i recreated the original hard drives caddies for those laptops, Latitude E6420 and E6430…
This serves as a full substitute for the predestined weak spot found in the Logitech G430, G930, and F540 Headsets. You're able to utilize the original screws. The cap is designed to be printed in an upright position to eliminate the need…
This model is compatible with the lego system.
This model is compatible with the lego system.
For printing these parts, it is recommended to use PET-G. For greater tightness, print at a speed of 50 mm/s and with an elevated nozzle temperature. Use self-tapping screws (25–35 mm) as shown in the figure. Original tires can be reused…
This model is compatible with the lego system.
I made this model because I had a Lenovo T430 that was missing the IO cover. It was missing the screw for it too, so I designed this model to not require a screw when mounting. (This is only for the mk1, mk2 requires a screw) It clips…
This is the part on the Logitech G430 headphones that appears to break (2 headphones both broken in my household). Pockets provide for recessed screw and nut placement for a cleaner look. I printed these as oriented, support-free, in PLA.…
I broke front bumper on MJX Hyper Go 14301. This is the replacement part (part number 14101). It requires supports, but only for the part mounted to the chassis. If you are looking for bumper mount (part number 14102), please see: MJX…
This is my Frankenstein Drybox setup remixing from a few people. This is not pretty or perfect but it works and functions like I want it. I'm just sharing what functionally works for me. update: humidity in room 58% but in the passive…
Gridfinity box to store CR2430 batteries. Gridfinity U-standards: 1 x 1 x 3 U (42 x 42 x 21 mm)
My kids broke yet another part of the hitch assembly so I've created it from measurements in CAD. We only have a dump wagon so it has not been tested with any other components. They've also lost the plastic screw which raises/lowers it,…
Sep 02, 2021 This is a mounting plate / wall bracket for the Fritzbox 7360, 7430 and identical models with a mounting hole spacing of ~178mm. After fixing the mounting plate to the wall, the Fritzbox can simply be hooked in. The side…
Remix of Dremel 4000 & Dremel 225 Holder - Gridfinity Système - Dremel Case Organizer for Dremel 4300.
This model is compatible with the lego system.
This is a replacement part for G430 Logitech headphones. The side piece that always breaks, has been rebuilt stronger than before. This is for the right speaker side, if you need the left side just mirror them in your slicer program.…
MJX Hyper Go 14301 front bumper mount. This is the replacement part (part number 14102). It requires supports.
Added a beacon and wanted a very quick 1 layer test of the bedmesh. Takes me 6 minutes to print and only 4 g of filament. All squares are connected so easy to pickup off build plate to discard. 430x430mm at 0.3mm layer height, for 500mm…
This model is compatible with the lego system.
Improved part cooling fan duct designs for the CreatBot F430 printer. Recommended to print using ABS, Nylon, or other high-temp filaments. Print Settings Printer: CreatBot F430 Rafts: No Supports: No Nozzle Size: 0.4mm Layer Height: 0.2mm…
Hi. On the left you can place your trimmer. In the middle is place for your small attechments. And on the right you have place for attechment (size 1-10).
This model is compatible with the lego system.
Just like the hakko originals for the FA-430 fume extractor. I made the rectangular one to the same measurements of the original and the round one has a larger OD which helps collect more fumes. Printed from PETG @ 0.2mm layers, 4-5…
This model is compatible with the lego system.
This doesn't need supports, it leaves lots of room for airflow throughout the bottom, and provides 6 mounting holes for flexible options. Pick any two. The base is oversized enough that this isn't a tight fit, and the cables can exit…
Battery charger mounting brackets. The rear two screws need to be swapped to M3 x 16. I use PETG filament.
Replacemnt part for the 2 pedal set from thrustmaster. I have made 40 and 42 gear variant. I found that both variants worked reasonably well, results may vary. For easyer printing i reduced the sholder from the original design aand added…
Exported in 2 parts for smaller printers, the internal pegs are optionals, but if you want to print them scale them down a bit so they fit. there is no fit tolerance on them.
Made a Batteryholder for CR24XX & CR20XX. Maximum is CR2450 and CR2032. You can modify the .3mf for your needs. You can make a color change on the writing on top. is a very easy print. Printed mine in PLA with no special settings.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
I couldn't find a mount for the usb-c mod for my T430, I tried one for the X230 ( https://www.thingiverse.com/thing:3732642 , the plug is from that model, I already printed it, so...) but it doesn't fit correctly on the T430, so I modeled…
Print as oriented . This minimizes support contact Use 8mm brim. Otherwise it will fall over. Turn on Organic or Tree Supports Use 0.08mm layer height for best results and a nicer looking part. CAD Model:…
This model is compatible with the lego system.
You'll need a large print bed to print this. Low profile version is here: https://www.printables.com/model/1326616-milwaukee-packout-low-profile-organizer-48-22-8431
I've printed the kit with PLA as it is stiffer then PETG. 6 perimeters and 6/6 top bottom walls. Try a 0.6mm outer perimeter width for better chamfers/fillets look. Once printed: apply M2 (3.2mm outer diameter) heat inserts using a…
I really liked this design so I moved a few things around for a snug fit with the watertight Sterilite 20 quart tubs. 5 spools fit tight. I did not use any spacers but might have to revisit that idea after I add passthroughs. I cut the 1"…
This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR2430 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)
It's a Ribbon Holder Replacement for Zebra GK420t/GX420t/GX430t Thermal Transfer Printers. I printed with 100% infill.
In this case, it's a Precision 3430 SFF. The original PSU passed a way. I decided to make some improvements, such as adding a graphics card, and for that, I needed to replace the ATX PSU. However, since I wanted to install it in a…
Spare part clip lock Philips Cucina Sandwich maker HD2430 replacement.
Replace the stock upper links with turnbuckles and dial in the rear camber on the MJX Hyper Go 14301 to tweak the handling. May require running larger diameter wheels (check my other models) to clear the parts. Hardware 2x M3x16…
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
This model is compatible with the lego system.
Spacer that let's you use 2032 cells in devices that want a 2430 cell.
The original design was well constructed, although it was purposed for the 04-06 model. For this version I revised some of the corners and made it so the cupholder frame sits almost flush with the inner frame of the automotive trim. It…
Печать без подставок. Слой 0.2.
I designed this bookend showcasing a model of a 40mm M430A1 HEDP (high-explosive dual-purpose) grenade as a farewell gift for a Lieutenant Colonel who just ended his successful term commanding a battalion in the German Armed Forces. The…
Packout organizer for Klein networking tools. Occupies the left side of the organizer. Tools stored: Tone and probe kit - VDV500-063 Ethernet Cable Tester Kit with Scout Pro 3 Tester, Remotes and Adapter - VDV501-851 Impact Punchdown…
Muss zum Laden den Akku aus dem Rad entfernen, bevor dieser am Boden rumliegt habe ich eine Wandhalterung gezeichnet. Bei der Montage muss beachtet werden das der Abstand zwischen Unterteil und Klammer min. 250mm betragen muss. Siehe…
A lightweight DVD bay cover for the T430 for anyone that wants to make their T430 lighter. Unlike the official DVD bay cover, it only clips onto the front of the bay, so it doesn't require any screws to mount. This model is designed to be…
This is a custom Modern Large Circular Hanging Lampshade. Assembled Dimensions: 430mm Diameter 160mm Height All parts can be printed on a 256x256mm print bed Print Info & Settings PLA (White) 0.4mm Nozzle, 0.2mm Layer Height Some parts…
SONY Gear 373614301 Models: SLV-P33, VP-0758/A, VP-0298 and etc.
A replacement bottom cover for the T430 but without mounting screws. I kept the airflow hole pattern from the original, but the original also had some tape bent over them perhaps to stop water ingestion? So you might want to put them on…
I needed a rear door speaker mounting bracket for the Lexus LS430, as the Mark Levinson sound system is dead and I did not want to bother fixing it. Decided to basically tear it out and replace it with all new sound system. For the rear…
This is a CR2032 and CR2430 battery storage bin remixed for the excellent gridfinity with pin https://makerworld.com/en/models/440624#profileId-346300 system that requires no magnets
Quick sketch of the 90 degree motor mount bracket, Step and STL included
Taking the available files from Calamity's Digital Constraction Collection I was able to mod the mask from Toa Mata Nui's build into a Printable form for use on builds Still have work to do in order to look 1:1. Print Settings Printer…
Cutting disc blade for Segway Navimow X series. Consist of two parts for easier printing without support. You will need 12 M4x20 hex screws and 18 M4 nuts. You can use original segway blades. When printed, holes for blades will be blocked…
This is a simple adapter to use CR2025 batteries in devices made for CR2430 batteries. In the pictures it is shown inside the cap of a Polar Stride running sensor. The adapter in the fotos was printed with the following settings:…
This wheel accepts Tamiya Mini Cooper M-Chassis 60D tires and allows you to run them on the MJX Hyper Go 14301. This gives a few more tire options for the car as well as some extra clearance if you want to add adjustable upper control…
Simple case for USB to TTL module (CH340) from our favorite supplier Aliexpress. https://www.aliexpress.com/item/32831329095.html?spm=a2g0o.order_list.order_list_main.60.20051802o3CkKt Print Settings Printer Brand: Bambu Lab Printer: A1…
The blue piece (43093) didn't bend enough to fit into the gray piece (73109), so I fixed that.
Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien CR2430. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…
I designed this quick holder for 2430 lithium cells which power my Zigbee wall switches, so I had somewhere compact and handy to store them, while also remembering which ones are charged and discharged. I've included the Fusion 360…
This is a cover to replace the netting that originally came with the duct nozzle on the Hakko FA-430 fume extractor.
Servo mount for my DIY Linear Actuator https://www.printables.com/model/961759-linear-actuator-for-motion-platforms-sim-racing Use DIN 912 M6x40 Screws and LF D35L50 coupler (19x10mm)
Print Settings: Material - PETG/ABS/PLA 2 Perimeters with 20% infill Print flat side down
The wind stop gaskets on some Ferrari 360 and 430 Spiders are subject to deterioration and cracking. The replacements are expensive (about $1k for all three) and only available as OEM. The current aftermarket wind stops are horrible and…
CR2430 see remix for other batteries
Spojovací tyčka na závit 430 mm
The wind stop gaskets on some Ferrari 360 and 430 Spiders are subject to deterioration and cracking. The replacements are expensive (about $1k for all three) and only available as OEM. The current aftermarket wind stops are horrible and…
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
Simple mount for EMAX motor.
not up to scale or perfect…have fun lexus LS fan boys.
Update: I made a new version, look here: https://www.printables.com/de/model/586045-replacement-wheel-v2-for-aeg-vampyr-430-vakuum-cle/files Replacement wheel for AEG Vampyr 430 Vakuum cleaner. The axis needs be printed horizontally and…
[EN] Sorta the antenna I have made from 15mm copper pipes. The crossbar is 15x20 mm wooden bar. The antenna cable is 5D-FB (8mm 50 Ohm). There are some holes in holders for that one, although I've made some mistakes making the holes for…
Platen roller bearings/clips for the Zebra GK420T, GX420T, GK430T, and GX430T. I've personally designed and tested these with my GX430T. Intended to replace the OEM ones from Zebra, designed with ease-of-print in mind without supports.…
The vent blades in my 2005 LS430 were loose and not in sync. I measured the shattered pieces of the connectors that were broken and printed these. Depending on tolerances in your case you may need to adjust the size of the holes. I've…
CAD model of the Kobiconn DC power jack Manufacturer Part Number: 163-4302-E I found this part on Adafruit ( https://www.adafruit.com/product/610 ) and did not find a model of it, so I made one. Not sure if the part is 100% accurate or…
Little adapter to use a 2032 battery in something designed for a 2430 battery.
PETG/ABS/equivalent recommended. The design derived from measurements of the broken original part. Since there are hardly any unbroken guards on these machines, the jointing part was considered unfit for purpose and made sturdier here.…
I wanted to mount my Lenovo laptop to some wire metro style shelving in my workshop. The attachment hooks will likely need to be modified to work with your particular shelves since they only attach to 1 of the 4 sets of wire shelving in…
This model is compatible with the lego system.
This is a very simple case to protect the development board from dust and ESD, at least partially. Just orient both parts flat on the print bed and use whatever settings you feel like.
I faced a lot of issues the original suction cup mount which were delivered with the "EHEIM Installationsset 2". I liked Geooper's idea and redesigned his holder for fitting into the EHEIM incpiria 430 fish tank. I can be clipped inside…
My new charger uses molex micro fit 3.0 balancing connector to charge 12s or 14s batteries. the connector is not easy to pull out from the socket. I have designed molex 43025-1600 handle which adds more area for my fingers.
I sold the DVD drive in my laptop to fund my electronics modding habit. Instead of having an unsightly gap, I modeled this part which allows me to store an HDMI adapter and a USB-C to barrel jack adapter. It clicks in without you having…
