SV06 Eddy probe mount v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount that replaces the original probe, designed to have the same offset as stock.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 877
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SV06 Eddy Probe mount
This is my first design. I'll probably improve the design. My first goal was to make a practical design that mounts the BTT Eddy probe at the same offset stock does so it it's compatible with the fan I use.
I'll upload the Fusion file later on.
Update 16/06/24
Made a new version. It's frustrating when the probe accidentally moves so I made it stationary. Testing this right now myself. Planning on making some additional versions for different nozzles/setups. This is for the default mk8 nozzle height.
Consider this a test version. The downside of this version is that installation is a bit awkward since one of the bold screws will be harder to reach. It's certainly doable but don't be in a hurry when installing.
The first version has the advantage you can install the probe, let it hang low and attach it to the extruder more easily. It's more lightweight so I can test temps and see if it's tough enough.
I will add another test altering the first version to be a bit more tight and shorter so installing it will be less difficult.