Apple iWatch charger holder Command Strip or screw mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Apple Watch charger holder that can be mounted with a small Command Strip, and another option for screw mounting.
- Ocena
- 4,75 / 5
- Polubienia
- 57
- Pobrania
- 329
- Wydruki
- 6
- Wyświetlenia
- 1377
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I couldn't find an inconspicuous Apple Watch holder, so I decided to make one. The first one I made was mounted with a small Command Strip to my bedside table, with the cord held closely to the surface of the table to prevent accidentally catching it. This can be mirrored in the slicer if needed to exit on the other side. I decided to modify it for a second option that uses a screw to mount.
I printed with 15% infill, 2 perimeters, 5 top layers and 4 bottom layers, in PLA, approximately 37 minute print time for Command Strip mounted unit, 38 minutes for screw mount.
12/10/21 - Added STL's with open bottom for easier removal of charger base.