Apple iWatch charger holder Command Strip or screw mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.48 – €0.59 net (excluding VAT)
For file: Apple iWatch charger holder Command Strip_0.2mm_PLA_MK3S_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.54 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 37.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Apple Watch charger holder that can be mounted with a small Command Strip, and another option for screw mounting.
- Rating
- 4.75 / 5
- Likes
- 57
- Downloads
- 329
- Makes
- 6
- Views
- 1,377
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
I couldn't find an inconspicuous Apple Watch holder, so I decided to make one. The first one I made was mounted with a small Command Strip to my bedside table, with the cord held closely to the surface of the table to prevent accidentally catching it. This can be mirrored in the slicer if needed to exit on the other side. I decided to modify it for a second option that uses a screw to mount.
I printed with 15% infill, 2 perimeters, 5 top layers and 4 bottom layers, in PLA, approximately 37 minute print time for Command Strip mounted unit, 38 minutes for screw mount.
12/10/21 - Added STL's with open bottom for easier removal of charger base.