1 / 8
Anycubic Kobra 2 (Pro) - Filament Holder Top, with and without 'arm'
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The filament holder allows you to mount your filament roll on top of the printer.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 344
- Wydruki
- 1
- Wyświetlenia
- 1408
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (37)Powiązane
You need two M6 screws.
The model without the arm is for the original arm.
If you have screws that are too long, I have added spacers to the files, these can be adjusted as required.
Zwei M6-Schrauben werden benötigt.
Das Modell ohne den Arm ist für den Originalarm.
Falls ihr Schrauben habt die zu lang sind habe ich verschiedene Varianten von Abstandhaltern in die Dateien eingepflegt.