1 / 3
Luba 2 garage adapter for a self-build garage with flat board — zdjęcie 1
1 / 3

Luba 2 garage adapter for a self-build garage with flat board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adapter can be used to screw a flat board to the charging station of the Mammotion Luba 2.

Ocena
5 / 5
Polubienia
31
Pobrania
344
Wydruki
0
Wyświetlenia
3933
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I have printed this model with PETG and with support. I suppressed the support in the area of the bores.

The design is only an adapter that can be used to screw a flat board (that you can buy somewhere) to the charging station. This works with 4x M5 screws and nuts to screw the board to the adapter and two additional M5 screws to screw the adapter to the charging station. Depending on how big and heavy your selected board is it is likely that some additional support at the end of the board might be neccessary to hold the weight of the board and prevent damage to the charging station. Also wind loads might be considered in your self-made construction.

The footprint of this model is slightely smaller than 230x230mm.