1 / 3
Luba 2 garage adapter for a self-build garage with flat board — image 1
1 / 3

Luba 2 garage adapter for a self-build garage with flat board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This adapter can be used to screw a flat board to the charging station of the Mammotion Luba 2.

Rating
5 / 5
Likes
31
Downloads
345
Makes
0
Views
3,940
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I have printed this model with PETG and with support. I suppressed the support in the area of the bores.

The design is only an adapter that can be used to screw a flat board (that you can buy somewhere) to the charging station. This works with 4x M5 screws and nuts to screw the board to the adapter and two additional M5 screws to screw the adapter to the charging station. Depending on how big and heavy your selected board is it is likely that some additional support at the end of the board might be neccessary to hold the weight of the board and prevent damage to the charging station. Also wind loads might be considered in your self-made construction.

The footprint of this model is slightely smaller than 230x230mm.