M5StickC PLUS2 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for protecting & carrying your M5StickC PLUS2
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 1089
- Wydruki
- 3
- Wyświetlenia
- 4996
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I couldn't find many cases for the M5StickC PLUS2 that I liked, so I made my own. This is a simple case which will protect the device and allow you to carry it with a lanyard or a key chain.
The M5StickC PLUS2 is just press fit into the case and it holds pretty snug. An attached lanyard string will also help to keep the device in place and from falling out with force.
The case has cut outs for all button functionality as well as the IR transmitter.
NOTE: I have not tested the case with any M5Stick-compatible HAT's, as I have none. I cannot guarantee fitment with any connected accessories.
This was printed with the following settings:
- .2mm Layer Height
- Brim Added
- No Supports Needed
- 15% Infill