Supernote A6X2 Magnet Case Template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A backplate for Supernote A6X2 DIY case using magnets on the device.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 1206
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Backplate for A6X2 using magnets to attach to the device. OBJ and Fusion files included to adapt for your use case. Dimension are accurate to tablet.
I found a iPad mini cover from clearance that almost fits A6X2 neatly but is just a tiny bit too narrow. Another issue is too strong magnets on top of the iPad cover as those trigger A6X2 HAL sensors.
Slot on right side is for pen strap. I used piece of fabric stiched to a loop and glued to the printed backplate.
Tablet attaches to pieces of metal on top and bottom of the backplate. Slot is 32 mm x 5,5 mm and around 2 mm deep. These pieces should not be magnetic; the magnets on A6X2 are adequate enough to keep the tablet attached. If you use magnets on the backplate, it might cause interference with the EMR pen.