Supernote A6X2 Magnet Case Template
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A backplate for Supernote A6X2 DIY case using magnets on the device.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 70
- Makes
- 0
- Views
- 1,206
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
Backplate for A6X2 using magnets to attach to the device. OBJ and Fusion files included to adapt for your use case. Dimension are accurate to tablet.
I found a iPad mini cover from clearance that almost fits A6X2 neatly but is just a tiny bit too narrow. Another issue is too strong magnets on top of the iPad cover as those trigger A6X2 HAL sensors.
Slot on right side is for pen strap. I used piece of fabric stiched to a loop and glued to the printed backplate.
Tablet attaches to pieces of metal on top and bottom of the backplate. Slot is 32 mm x 5,5 mm and around 2 mm deep. These pieces should not be magnetic; the magnets on A6X2 are adequate enough to keep the tablet attached. If you use magnets on the backplate, it might cause interference with the EMR pen.