Counting matching models…
Supernote A6X2 Nomad case with Samsung S7 pen magnets to hold device (20 x 1.7 x 6 mm) magnets to hold pen (5 x 1 mm) magnets to hold lid (6 x 1 mm in bottom case + 9.5 x 0.7 mm in lid) felt as cover material (2.5mm) working as hinge I…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
I designed an adapter for the Supernote Ceramic Nib Refill to work with a Tactile Turn Ultem Pen. This will allow you to use the refill in the Tactile Turn Bolt Action Short pen. The adapter prevents the copper coil from coming into…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
For the base, the “wider” side touches the build plate. For the “click” side, the flat side touches the build plate. No supports needed. Raft optional for bed adhesion
The Supernote Nomad is a fantastic eInk device, but it's a little fragile if you're tossing it in your bag. This rigid slipcase may help protect the device from crushing and twisting that might damage the delicate screen. The case was…
I wanted something grippy and protective for my Supernote Nomad, so that my Supernote wouldn't slide off of tiny lecture hall writing pads. Printed in TPU, but you could probably print it in PLA as well (after cutting out the power button…
Supernote AX2 Manta LAMY Safari Vista Pen Clip Printing Recommendations For best strength, print vertically (with the layer lines perpendicular to the Supernote)
This cap hooks to supernote pen holder, and fits the Staedtler Noris Digital EMR pen. Print with support, as in the picture or .3mf file.
I scaled Zinput's case to eliminate the loose fit they mentioned in the original description. Warning: I printed this in Bambulab's TPU for AMS. This has a hardness of 68D, which is noticeably harder than the typical 95A of most TPUs. I…
Backplate for A6X2 using magnets to attach to the device. OBJ and Fusion files included to adapt for your use case. Dimension are accurate to tablet. I found a iPad mini cover from clearance that almost fits A6X2 neatly but is just a tiny…
This project provides parts to construct a folio/case for the Supernote Nomad from Ratta that looks like a casebound book. Supplies needed: DIY folio kit for Supernote Nomad from Ratta:…
This project provides the liner pieces for DIY folio cases for the Supernote Nomad from Ratta. See Ratta's guide for DIY folio cases here:…
A simple modification of @scaryPug 's fantastic adjustable drawing tablet stand , adjusted to be a bit longer and much narrower. This is intended to hold my Supernote AX2 Manta eink tablet for note-taking, in portrait orientation. Update…
This is a pen body + TPU grip sized to fit the pen inserts/refills for Supernote e-ink tablets . Four different shapes of TPU grips are provided, so you can choose the shape that feels best in your hand. Alternate grip shapes can also be…
I made this simple model to fill up the space above the Supernote pen refill in a Lamy Safari Rollerball body. My refill snapped into the front of the body with an audible “pop!” and stayed put, but rattled back and forth a little. This…
Printable Body for the Supernote (E-Ink notebook) Half-Pen Module. See link here for module: https://supernote.com/collections/diy/ This is a quick body to be able to stick the linked half-pen module into. I tested engaging the threads,…
A vertical stand for the Ratta Supernote (Standard) Stylus. Gets it off the table so it can be picked up easily and also so it doesn't roll around (not that it rolls much before). As pictured with 0.1mm layers, but it also printed…
Hi guys, I've found this, I had a Half-pen Module (section-refill) for HoM 2 , in my drawer and I was searching for a 3d print to make it into a pen. I've found this make from @knuckles625, and I've decided to give it a try, afterwords,…
Replacement Pen Holder for Supernote Manta (Heart of Metal 2) Designed to replace the stock fabric loop, this custom holder matches the contour of the Heart of Metal 2 pen cap for a secure, snug fit. Secure Locking Mechanism: Once…
This is a simple protective case for the Supernote Nomad A6 X2. I did not want a bulky folio with a front cover as that just makes the whole thing a bit cumbersome to use around the house. This case provides basic protection from everyday…
Recently got a Supernote A5X and the cases on Ratta's site are sold out so I made my own. This might be compatible with the Supernote Manta (A5X2), but I don't have a device to test it. I printed the front and back covers in 4 parts each…
I wanted to purchase a Supernote, and could not decide which one just based on the specs, so I decided to print physical replicas of the two options to hold in my hands and get an idea of the size. They include a little indent to show the…
EN The Supernote Nomad is a great device, but its protective folio starting at 60€ is quite expensive. Some companies, such as Atoma, Swingblok, Levenger, Staples, propose diverse modular notebooks to which pages, covers, tabs, and many…
Layer height: 015 Nozzle 0.4mm Solid filling:20% See the video:
The notch side is on the top of the device and it kind of clicks into place when it's pushed all the way down. The notch is there to help pry it off if it's a little too tight of a fit.
This attaches to the Supernote Manta to replace the floppy elastic pen holders. The holder is specifically designed for the OHTO GS02, but other pens may fit. Feel free to remix as you see fit. For the GS02 Supernote modification, I…
Layer height 15 Fill 20% Nozzle size 0.4 You'll need to cut and sand the plastic star that the ink cartridge fits into. See the photos.
Gives a bit extra on the side to rest your hand while writing. Works with right or left hand writers. Uses 6 5x3mm magnets. The tops surface under the Nomad is a bit wonky, but works well enough.
Felt that none of the available cases for the a5x were similar to the ones for Manta Modified existing case design on printables to create the two sides. Cut off 2mm from edges since this is just sides that fit on top of the device.…
Leather folio compatible version. As with the original, this case is compatible with the Supernote Nomad and the various pens. Printed with PLA.
This is a space-saving under-shelf mount designed specifically for the Supernote Nomad. It's perfect for monitor risers and desk shelves, sliding out and tilting downward to give you a convenient, angled view for quick notes, checking…
Changelog 2026-07-19: Added back the chamfer to the Spring Retainer that was accidentally removed before the release of the final version Parts Supernote Refill Paper Mate Profile 1.4 bold point pen ; you can get them in other stores too.…
Just the right amount of pressure: 1-to-1 clicking pressure reproduction. If your prints don't fit, it's time to recalibrate your printer! Print with brim
Felt that none of the available cases for the a5x were similar to the ones for Manta Modified existing case design on printables to create the two sides. Cut off 2mm from edges since this is just sides that fit on top of the device.…
This case is compatible for users with the Supernote Nomad and premium Heart of Metal 2 pen. My Supernote goes in and out of my backpack daily. So I wanted to design this case to make the device and Folio case last longer. Printed in PLA.…
This adapter lets you turn a Kaweco brass EMR pen into a premium stylus with a ceramic nib using a Supernote refill. Without it, the brass body interferes with the signal and the pen won’t work properly—this fixes that. Instructions:…
Is your Supernote Nomad just... there ? It's time for an upgrade! Introducing the 3D printable stand with a "just right" 10-degree tilt – say goodbye to hunching and hello to glorious screen visibility. We even gave your pen its own…
Made this holder with elastic so I can stand and hold it with much less fear of dropping it, especially while walking. I wanted it low profile so it still sits pretty much flush against the table and I can write on it without it really…
