Supernote Half Pen Module Body
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable Body for the Supernote (E-Ink notebook) Half-Pen Module
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 560
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable Body for the Supernote (E-Ink notebook) Half-Pen Module. See link here for module: https://supernote.com/collections/diy/
This is a quick body to be able to stick the linked half-pen module into. I tested engaging the threads, but even on my Bambu X1C with 0.2 nozzle, there wasn't enough resolution & strength for it to be worth it. Therefore its intended to be press-fit. Use a little tape if the module is loose, or a little scaling if the module is too tight (no idea on the tolerances for these modules). Feel free to remix if you get a threaded one to work.
Pen body dimensions are modeled after the Faber-Casterll PITT series of fineliners, as they're my favorite normal pens. Maybe I'll model a version which has a similar cap at some point
Cap-less model is completely supportless. Use a brim and print upright