Supernote Half Pen Module Body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable Body for the Supernote (E-Ink notebook) Half-Pen Module
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 560
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable Body for the Supernote (E-Ink notebook) Half-Pen Module. See link here for module: https://supernote.com/collections/diy/
This is a quick body to be able to stick the linked half-pen module into. I tested engaging the threads, but even on my Bambu X1C with 0.2 nozzle, there wasn't enough resolution & strength for it to be worth it. Therefore its intended to be press-fit. Use a little tape if the module is loose, or a little scaling if the module is too tight (no idea on the tolerances for these modules). Feel free to remix if you get a threaded one to work.
Pen body dimensions are modeled after the Faber-Casterll PITT series of fineliners, as they're my favorite normal pens. Maybe I'll model a version which has a similar cap at some point
Cap-less model is completely supportless. Use a brim and print upright