Foldable Box - print in place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foldable Box. Print in place. Made to gift jewelry.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
Foldable Box. Print in place. Fits Bambu Lab X1 Carbon. For printing on Prusa i3 mk3/mk4 you need to scale the box and the key down by 5%, so 95% of the original size.
Made to gift jewelry.
-Folds open when the “Stöpsel” (Key) is unscrewed (pressed down and unscrewed - clockwise for a change).
-Dimensions(Box):
80mm x 80mm x 80mm+
-Be sure to use concentrical infill pattern for the bottom layer, if you dont the box wont fold.
-"Stöpsel Naggich" is just the base “Key”. You can edit it to add/place your preferred object on top.
-view “Arschloch-Box” for example. There were magnets used to lock the middle finger to the flower. Magnets used were the standard set of Prusa-magnets: https://www.prusa3d.com/de/produkt/set-of-magnets/
→ Be sure to use superglue to glue the magnet into the flower while embedded-printing as the magnet will probably get stuck to the nozzle while going over it.