Foldable Box - print in place
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foldable Box. Print in place. Made to gift jewelry.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
Foldable Box. Print in place. Fits Bambu Lab X1 Carbon. For printing on Prusa i3 mk3/mk4 you need to scale the box and the key down by 5%, so 95% of the original size.
Made to gift jewelry.
-Folds open when the “Stöpsel” (Key) is unscrewed (pressed down and unscrewed - clockwise for a change).
-Dimensions(Box):
80mm x 80mm x 80mm+
-Be sure to use concentrical infill pattern for the bottom layer, if you dont the box wont fold.
-"Stöpsel Naggich" is just the base “Key”. You can edit it to add/place your preferred object on top.
-view “Arschloch-Box” for example. There were magnets used to lock the middle finger to the flower. Magnets used were the standard set of Prusa-magnets: https://www.prusa3d.com/de/produkt/set-of-magnets/
→ Be sure to use superglue to glue the magnet into the flower while embedded-printing as the magnet will probably get stuck to the nozzle while going over it.