1 / 3
Raspberry Pi 4B Baseplate with SSD Slot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple baseplate for the Raspberry Pi 4B with an 2.5" SSD holder underneath it.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 1284
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (41)Powiązane
A simple baseplate for the Raspberry Pi 4B with an 2.5" SSD Holder underneath it.
It requires 4x M3x5mm and 4x M2.5x8mm screws.
There are 4 spacers that sit directly under the Pi.
Printed without support with PLA on a Mini+, PETG might be slightly better when it comes to thermal properties and heat generation of the components.