Mister SNAX Snap Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple snap fit enclosure for the SNAX (SNAC V2) by MiSTer Addons.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
This is a simple snap fit case for the Mister Addons SNAX (or SNAC V2) PCB. While they now come in a nice injection molded case, they originally shipped as a bare PCB. Wasn't too happy with that, and while there is another model by Retinoic, I didn't have great results trying to print it.
This model uses a single M2x6 screw and heat set threaded insert to mount the board to the bottom since the SNAX only has a single M2 sized mounting hole. If you don't have an M2 Screw or threaded insert, you can probably get away without it by being a bit more gentle when you pull or insert the HDMI and USB cable. The fit is quite snug even without being screwed down.
Designed in Onshape
Printed on: Artillery Sidewinder X1 with 0.6 Nozzle
Material: Polyterra PLA
Layer Height: 0.3mm
Perimeters: 3
Supports: None
Infill: 15%
SNAX sold here: https://misteraddons.com/products/snax
Retinoic's Case: https://www.printables.com/model/244701-snax-snac-adapter-case
PS: I'm a beginner 3D design/modeler, so if you have issues or critiques, please let me know.