Wilderness Systems Kayak Box Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wilderness Systems Kayak Box Latch
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wilderness Systems Kayak Box replacement Latch
This latch is for the wilderness systems waterproof box that is ~8"x4.5" in size.
The original latch was plastic with two nubs on the ends to hold it in place and act as a hinge. Over time one of the plastic nubs failed and the latch would fall off the box.
This replacement latch uses a piece of 12 gauge copper wire as the hinge in place of the nubs.
Printing:
PETG - (or any filament that is UV resistant since this is for outdoor use).
0.4mm nozzle
0.20 mm layer height
24% infill
no supports
3 vertical shells/perimeters
print time is ~31 minutes on my mk3s.
Enjoy!