Fritzbox Halterung für 7590 / 7590AX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,55 € – 3,12 € netto (bez VAT)
Dla pliku: Fritzbox-Befestigung_V4_7590AX_0.4n_0.2mm_PLA_MK4IS_2h40m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,84 € netto (środek widełek).
- Masa podana przez autora
- 39 g
- Czas druku podany przez autora
- 2,67 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Wandhalterung Fritzbox 7590 - wall holder 7590
- Ocena
- 4,5 / 5
- Polubienia
- 14
- Pobrania
- 479
- Wydruki
- 1
- Wyświetlenia
- 1647
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
UPDATE 2025-08-21
Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX.
I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's and noticed that the 7590 has some interfering edges on the inside.
So, on both my models (I own both), the groove widths are pretty much the same...but not on my neighbor's; I used my neighbor's 7590 as a reference.
V4: revised for the 7590AX
V5: for my personal use with a fan mount
V6: revised for the 7590AX with a second bracket
V7: revised for the 7590
V8: revised for the 7590 with a second bracket
I'll leave the old versions online...
----------------------------------------------------------------------------------
Da die Lieferung unsere Kommode wahrscheinlich sich noch ewig zeiht, habe ich ein Provisorium benötigt mit einer Halterung.
(Ich bitte um Entschuldigung für die nicht so guten Bilder).
Fast alle Halterungen, welche ich gefunden habe, waren einfach nicht so wie ich mir es vorgestellt habe und so habe ich aus den Anregungen der Sucher eine eigene Halterung gestaltet.
Mit zwei Bohrungen für die Wand, zwei Längslöcher für direkte Verschaubung an der Wand oder an Holz. So das die Kabel nach unten gehen und mit der Abstand des Steges da ich noch einen Lüfter für die Kühlung hinten dran habe.
Filament : Bambu PETG Basic
Slicer : BambuStudio - 0,20 Standard
Layer : 0,20
Wall : 3
Upper layers : 4
Lower layers : 3
Infill : 35% Gyroid
Raft : No
Support : yes - tree (auto)
Speed : slowly (170 between 200)