40 modeli
Halter für FritzBox 7590 AX um diese mit 2 Schrauben an der Wand zu befestigen. Den Halter kann man auch so als Tischständer benutzen damit das Gerät eine bessere Belüftung von unten bekommt. Drucken im PrusaSlicer : bei den Haken…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
simple leg to place the FRITZ!Box 7590 in an upright position. Print instructions You need to print two pieces. Update Added a version with legs approx. 14 mm longer for better clearance with thicker cables.
Here's my FirtzBox 7590 Wallmount to mount that great box upside down to the wall with some Space behind the Box to do clean cable management. Just print it like it's shown in the slicer Picture. It can possily fit on the smaller 75x0…
I want to create a stand for the FritzBox 7590 AX V2 which provides the following features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should be…
Wandhalterung mit Kabelzuführung von Unten und guter Belüftung der Fritzbox. Gedruckt mit 65% Infill in ABS. Stützen aktviert um die “Nasen” der Halterung sauber zu drucken.
I remixed a Fritz!Box stand for the 7590. Made it higher so the connectors fit underneath. Also added a second version where the Fritz!Box is leaning a little bit backwards. Remixed from this:…
Rackmount für die FritzBox 7590 im 19 Zoll Serverschrank. Dabei können die Anschlüsse der FritzBox über bis zu sechs Keystone Adapter nach vorn herausgeführt werden. Folgendes wird zur Montage der beiden Teile benötigt: 8x…
This is an stand for Fritzbox! 7590 (don't fit to 7590ax) it provides the folloging features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should…
Rackmount 19" for the FritzBox! 7590AX. This rackmount does not route the rear connections to the front in case this is not required or they are not used at all. To mount the two parts use some M3 bolts.
This model is compatible with the lego system.
Resized 1U Rackmount 19" for the FritzBox! 7590AX. Keystones on the right side
My router sits right above a cable gland and all the network stuff is on the other side of the wall. To hide the cable gland and the cables i designed this cover, which fits between the round things on the 7590 but doesn´t cover the…
English This is a specially designed mount for securely and space-efficiently installing the Fritz!Box 7590 AX (V1) in a 10" server rack. It is ideal for use in IT environments where organized and tidy storage of networking equipment is…
A quick'n'dirty remix of a FritzBox Wallmount with flat backplate for double sided gluetape
This is a wall mounting plate adapter that I've made due replacement of my old Speedport W724V. It was mounted on the wall by two screws. For the new Fritz!Box 7590 I didn't want to drill new holes, so I decided to make an adapter plate…
A quick stand I made to be able to set my router up vertically so it takes up less space and hide the cables. Added some decoration for fun. I also included a blank model without the cutouts to fit this specific model so you can remix it…
I wanted to have an easy to print wall mounting device for my FritzBox! 5690 that I can attach to the wall with the connections up. The version from SteveBa (thanks for the later help) seemed to be perfect but unfortunately was for the…
Aussparung für seitliche Anschlüsse hinzugefügt (USB / TAE) Die Druckdatei im 3mf Format ist mit BambuStudio Version 1.8.2.56 erstellt. Sie enthält “negative” Teile um die Aussparung zu ermöglichen. Ggf. das linke Teil einfach spiegeln um…
The screws have to have a head diameter < 9 mm. The slot after the hole is for the routers anti-skid pads.
During the hot summer months, the Fritzbox tends to experience a decrease in performance due to overheating. To prevent this issue, I have designed a sleek stand equipped with a holder for a USB fan (40x40x10) for active cooling. Printed…
In der Scheune wird es im Sommer zu warm und die Fritzbox hängt sich auf, daher nun eine Variante mit Lüfter, welcher vom USB betrieben wird. Mit genug Platz für Luftzirkulation sinkt die Temperatur drastisch. Lüfter ist seitlich versetzt…
Parametrizable 10 inch and 19 inch rack mount for - FritzBox 6590 and 7590 - Netgear GS316 / MS316 and GS308 / MS308 Screw size is parametrizeable, example is with M4 10mm screw Source at Github https://github.com/bobosch/RouterRack
Hi, another vertical shelf stand for 7590 Fritz!Box, made in 3 parts, just in case you have a lot of cabling i suggest to use also the front cover. Vertical stand since the hot season is arriving and this the device seems an heating…
Wandkonsolen für die Fritz!Box 7590 und 7590 AX mit Beschriftungen zum Einpassen Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Yes Supports: No Infill: 20% Filament: Sunlu PLA+ weiss Category: Office
Als Lüfter verwende ich einen 140er Standard PWM-Gehäuselüfter von be quiet! Diesem habe ich einen USB-Stecker angelötet, der direkt von der FritzBox versorgt wird und somit mit 5Volt betrieben wird. Die Funktion von Lüftern die nicht…
I bought a used FritzBox 7590 to enhance my home network. The mount for my 5690 fiber was too big and needed some remodeling. The idea of the mount is to have the connections accessible from above. It is also possible to put it under a…
This is a Server Rack Case for a FritzBox 7590 AX v2 and a Raspberry Pi 4 All Netzwork Connection getting passed through to the front. with Keystone Female to Female connectors.
🇬🇧 English below · 🇩🇪 Deutsch weiter unten English Screwed straight to the wall, a FRITZ!Box sits with its vented underside almost flat against the plaster. This bracket holds it 20 mm off the wall so air can flow behind it, and it uses…
It’s a hot summer and even the Fritzbox is working up a sweat. I still had some pengda 4020 12V 3D Turbo radial fans left over, which can be powered by the Fritzbox’s 5V output. Unfortunately, you’ll have to sacrifice a standard USB cable…
Riser to place FireTab10 Dock over Fritzbox 7590 AX
Rackmount 19" for the FritzBox! 7590AX. This rackmount does not route the rear connections to the front in case this is not required or they are not used at all. To mount the two parts use some M3 bolts.
I wanted to have an easy to print wall mounting device for my FritzBox! 5690 that I can attach to the wall with the connections up. The version from SteveBa (thanks for the later help) seemed to be perfect but unfortunately was for the…
I wanted to have an easy to print wall mounting device for my FritzBox! 5690 that I can attach to the wall with the connections up. The version from SteveBa (thanks for the later help) seemed to be perfect but unfortunately was for the…
