1 / 3
Speedport W724V to Fritz!Box 7590 Wall Mounting Holes Adapter Plate — zdjęcie 1
1 / 3

Speedport W724V to Fritz!Box 7590 Wall Mounting Holes Adapter Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a wall mounting plate adapter that I've made due replacement of my old Speedport W724V. It was mounted on the…

Ocena
4,75 / 5
Polubienia
10
Pobrania
165
Wydruki
3
Wyświetlenia
755
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

This is a wall mounting plate adapter that I've made due replacement of my old Speedport W724V. It was mounted on the wall by two screws.

For the new Fritz!Box 7590 I didn't want to drill new holes, so I decided to make an adapter plate for it.

It fits very well! See print settings for more information.

Notes:

Print orientation: Flat side down.

For strongness I recommend to use at least 3 perimeters. I used 4 and its perfectly strong with PLA.

Tagi